Bhartiya sainik
Member
Perhaps the easiest full-scale F-47 look-alike TD/prototype modified from existing jet F-22.
The wing & tail-stab positions are interchanged & rudders removed.
It is a quick, simple,notional edit, many small flaws can be observed by people into 3D CAD.
Making its front, side, bottom views w/o 3D S/w by just imagining is very tedious at this time, what i used to do on graph sheets✏ in school-days in 1990s watching F-117, B-2, developing F-22 on Discovery channel. The good old days
Anyways, i wonder if LM built such a jet for competition or research.
View attachment 52635
Here is the V2 with wing lengthened, leading edge angle increased.
The canard had to be shortened, maintaining planform design. With TVC nozzles, big canards may not be required.
I made the nose narrower, triangular to lessen drag & RCS.
Comparison with V1 is also shown.
The day i'll get a light weight, old, stable version of some 3D CAD S/w for my old laptop, i'll start translating these into 3D.
Feedbacks are welcome, i'm making a V3 also.















